Specialty Access Doors in Las Vegas, NV
Our specialty access doors in Las Vegas, NV, are the perfect solution for securing and providing easy access to critical areas in commercial, industrial, and residential spaces. Designed with durability and versatility in mind, our access doors are ideal for applications such as maintenance rooms, HVAC systems, and plumbing access. Whether you need a standard or custom-built door, our products offer seamless installation, long-lasting performance, and superior security.
LT-4000 Aluminum Access Door
The LT-4000 is a durable, lightweight aluminum access door designed for use in walls and ceilings. Its robust yet lightweight build facilitates easy access to large openings. Featuring a mitered aluminum frame, it offers an attractive, architecturally refined appearance. The door panel is lined with 3/4″ polystyrene insulation for added efficiency.
Constructed entirely from aluminum, the LT-4000 is ideal for both exterior applications and specific interior environments where moisture or corrosion may be a concern. Additionally, optional gasketing between the door and frame ensures a secure, airtight seal.
Product Features
- Mitered Aluminum Frame That Provides an Architecturally Pleasing Appearance
- Aluminum Door Panel Lined with 3/4″ Polystyrene Insulation
- All Aluminum Construction Is Ideal for Exterior Applications, Also Specific Interior Applications Where Corrosion or Moisture Is a Concern
- Gasketing Between the Door and Frame
Specifications:
- Door/Door Frame: Aluminum: .064 Door and .080 Frame
- Flush to the Edge of the Frame, 1-5/16″ Mitered Aluminum Extrusion Flange with 1-1/2″ Deep Mounting Frame
- Hinge: Doors with a Width of 24″ or Less to Have Concealed Pin Hinge
- Doors with a Width over 24″ to Have Continuous Aluminum Piano Hinge with an Exposed Knuckle, Set to Open to 180 Degrees
- Insulation: 3/4″ Type 3 Expanded Polystyrene (EPS) Foil-Lined Insulation, with a 3.18 R Value
- Gasket: 1/8″ x 3/8″ Closed-Cell Neoprene Gasketing
- Standard Latch: Screwdriver-Operated Cam Latch
- Optional Latches/Locks: Cylinder Lock and Key
- Finish: Mill Finish
- Standard Sizes Range From 8″ x 8″ to 72″ x 48″
- Special Sizes Available Upon Request
LT-4000 Product Page
LT-4000-Submittal-1
LT-4000-Submittal-2
LT-4000-Submittal-3
SF-2000 Surface Mount Access Door
The SF-2000 is a versatile surface-mounted access door designed for use in all wall and ceiling types. It features rounded safety corners for a sleek, architecturally appealing look. Equipped with an exposed continuous piano hinge, the door panel opens up to 175 degrees for easy access. The SF-2000 is perfect for a variety of applications, and its corner mounting holes simplify installation. Without a frame extending into the wall or ceiling, it’s ideal for accessing irregular or odd-sized openings.
Product Features
- An Exposed Continuous Piano Hinge That Allows the Door Panel to Open to 175 Degrees
- No Frame to Extend into the Wall or Ceiling
- Perfect for Access to Odd-Size Openings
Specifications
- Door/Door Frame: Steel: 16 Gage, Flush to Frame with Rounded Safety Corners and a One-Piece Outer Flange
- Frame Is a One-Piece Outer Flange
- Hinge: Exposed Continuous Piano Hinge
- Standard Latch: Stainless Steel Screwdriver-Operated Cam Latch
- Optional Latches/Locks: Cylinder Lock and Key, Allen Head Cam Latch, and Spanner Head Cam Latch
- Finish: 5-Stage Iron Phosphate Preparation with White Alkyd Baked-On Enamel
- Standard Sizes Range from 8″ x 8″ to 24″ x 24″
- Special Sizes Available upon Request
SF-2000 Product Page
SF-2000 PDF Submittal
ADWT Airtight/Watertight Access Door
The ADWT is a flush access door that has been tested for air infiltration and water penetration. The door and frame are fully welded and gasketed. This access door is ideal for use in laboratories, clean rooms, operating rooms, etc., where an airtight/watertight seal is required. It is standard in type 304 stainless steel with a #4 satin polish. Prime-coated steel is also available.
Product Features
- A Flush Access Door That Has Been Tested for Air Infiltration & Water Penetration
- Door and Frame Fully Welded
- Continuous Bulb Trim Gasket
- Continuous Stainless Steel Piano Hinge
- Air Infiltration: Less than 0.01 Cfm/Sq Foot – ASTM E 283
- Water Penetration: No Leakage at 15.05 Psf – ASTM E 331
Specifications
- Door/Door Frame: Flush to Frame with Reinforced Edges
- Stainless Steel or Steel: 16-Gauge Door; 16-Gauge Mounting Frame
- Hinge: Continuous Exposed Stainless Steel Piano Hinge
- Gasket: Continuous Bulb Trim Seal
- Standard Latch: Stainless Steel Phillips Head Screws Standard
- Optional Latches/Locks: Stainless Steel Allen Head Screws,
- Stainless Steel Spanner Head Screws, Torx, Cylinder Lock & Key
- Finish: Stainless Steel; #4 Satin Polish
- Steel: 5 Stage Iron Phosphate with a Prime Coat of White Alkyd Baked-On Enamel
- Standard Sizes Range from 12″ x 12″ to 30″ x 48″
- Special Sizes Available upon Request
ADWT Product Page
ADWT PDF Submittal
AS-9000 Fully Gasketed Access Door
The AS-9000 is a fully gasketed access door designed for installation in walls and ceilings. It features a formed door panel with a concealed hinge and a closed-cell neoprene gasket, ensuring a tight seal. Primarily available in stainless steel with a #4 satin finish, it can also be ordered in prime-coated steel. This door is ideal for use in clean rooms, laboratories, operating rooms, and similar environments.
Please note that while the AS-9000 is fully gasketed, it has not been tested for air penetration.
Product Features
- Fully Gasketed Access Door
- Formed Door Panel with Reinforced Edges and a Concealed Hinge,
- Along with a Closed-Cell Gasket Between the Door and Frame
Specifications
- Door/Door Frame: Stainless Steel or Steel: 18 Gage Door, 18 Gage Mounting Frame, Flange to Be 1″ Wide
- Hinge: Concealed
- Gasket: Pemko S88 1/8″ x 3/8″ Opened Cell Gasket
- Standard Latch: Stainless Steel Screwdriver-Operated Cam Latch
- Optional Latches/Locks: Cylinder Lock and Key, Allen Head Cam Latch, and Spanner Head Cam Latch
- Finish: Stainless Steel: #4 Satin Polish
- Steel: 5-Stage Iron Phosphate with a Prime Coat of White Alkyd Baked-On Enamel
- Standard Sizes Range from 12″ x 12″ to 24″ x 36″
- Special Sizes Available upon Request
AT-5020 Product Page
AT-5020 Submittal
WD-8000 Walk Through Access Door
The WD-8000 walk through access door provides convenient access to ductwork interiors and air handling units. Its heavy-duty construction, continuous hinges, and compression handles provide for low leakage in low to medium-pressure systems and plenums.
Product Features
- Good for Heavy-Duty Construction along with Continuous Hinge and Compression Handles
- Optional Features: Removable Door Panel/Vision Panel/High-Pressure Units
Specifications
- Door/Door Frame: 22-Gauge Galvanized Steel, Double Panel
- Frame Is 1 15/16″ Wide x 1 1/2″ Deep Extruded Aluminum with Mitred Corners
- Hinge: Continuous Steel Piano Hinge – Opens 180 Degrees
- Insulation: Door Panel Filled with 1″ Thick Fiberglass Insulation – 4 R-Value
- Gasket: 1/8″ Thick x 1/2″ Wide Closed Cell Neoprene Gasketing Between Door and Frame
- Standard Latch: Dual-Acting Compression Handles – Operates from Both Sides
- Units 48″ High and Under to Have 2 Handles
- Units over 48″ High to Have 3 Handles
- Finish: Mill Finish
- Standard Sizes Range from 24″ x 36″ to 30″ x 72″
- Special Sizes Available upon Request
WD-8000 Product Page
WD-8000 Submittal