Duct Access Doors in Las Vegas, NV
Get duct access doors in Las Vegas, NV, from Victory Construction Products LLC. This type of door provides easy and efficient access to ducts for maintenance, inspection, and cleaning. These doors are typically installed in the walls or ceilings of ductwork to ensure that technicians can quickly reach areas for repairs or modifications without causing unnecessary disruption to the surrounding structure.
HD-5070 "Hinged" Duct Access Doors
Duct access doors provide convenient, economical access to duct components. The insulated door panel and the gasket between the door and frame ensure a tight seal without obstruction in the air system. Duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.
Product Features
- Insulated Door Panel, Along with the Gasketing Between the Door and Frame
- 5/8″ Notched Knock-Over Tabs on the Inside of the Frame Provide for Easy Installation
- These Doors Are Designed for Use in LOW to Medium Pressure up to 3″ Static W.G.
- Options:
- Aluminum
- Stainless Steel
- Cylinder Lock and Key
- Hasp and Staple
- L Handle
Specifications
- Door: 24-Gauge Galvanized Steel, Double Panel
- Frame: 24-Gauge Galvanized Steel with 5/8″ Notched Knock-Over Tabs
- Hinge: Continuous Aluminum Piano Hinge
- Insulation: Door Panel Filled with 2″ Fiberglass Insulation (7.7 R Factor), Compressed into 1″
- Gasketing: 1/8″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing Between Door and Frame and Also Between the Frame and Duct
- Standard Sizes Range From 6″ x 6″ to 24″ x 24″
- Special Sizes Available Upon Request
HD-5070 – Product Page
HD-5070 – Submittal
CD-5080 Double Cam "No Hinge" Duct Access Doors
These duct access doors provide convenient, economical access to duct components. The insulated door panel and the gasket between the door and frame ensure a tight seal without obstruction in the air system. Duct access doors are available in either hinged (HD-5070) or double cam (CD-5080) construction.
Product Features
- Designed for Use in Low to Medium-Pressure up to 3″ Static W.G.
- 5/8″ Notched Knock-Over Tabs on the Inside of the Frame Provide for Easy Installation
- Options:
- Aluminum
- Stainless Steel
- Vision Panels
- Cylinder Lock and Key
- Hasp and Staple
- L Handle
Specifications
- Door: 24-Gauge Galvanized Steel, Double Panel
- Frame: 24-Gauge Galvanized Steel with 5/8″ Notched Knock-Over Tabs
- Insulation: Door Panel Filled with 2″ Fiberglass Insulation (7.7 R Factor), Compressed into 1″
- Gasketing: 1/8″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing
- Between Door and Frame
- Latch: Self-Tightening, Hand-Operated Cam Latch
- Standard Sizes Range From 6″ x 6″ to 24″ x 24″
- Special Sizes Available Upon Request
CD-5080 Product Page
CD-5080 Submittal
RD-5090 Duct Access Doors for Round Ducts
The RD-5090 is designed to provide convenient, economical access to round ducts. The pull-and-catch lock system, along with the door gasketing, assures a tight seal without obstruction in the air system. The steel continuous piano hinge provides for easy installation.
Product Features
- Pull and Catch Lock System
- Gasketing on the Door Ensures a Tight Seal without Obstruction in the Air System
Specifications
- Door/Door Frame: 16-Gauge Galvanized Steel
- Gasketing: 1/8″ Thick by 1″ Wide Closed Cell Neoprene
- Standard Latch: Plated Steel Pull and Catch
- Finish: Mill/Aluminum
- Standard Sizes Range from 5″ Duct Opening to 24″ Duct Opening
- Special Sizes Available upon Request
RD-5090 Product Page
RD-5090 PDF Submittal
GDD Grease Duct Access Door
The GDD is a UL and ULC-listed access door for installation into grease ducts. Its 16-gauge steel construction, along with the high-temperature-resistant gasket and sealant, allows this door to be grease-tight and airtight. This door meets or exceeds the requirements of all mechanical codes.
Product Features
- Bolt in Unit Easily Installed into Existing Ductwork
- Duct Cutout Template Included
- No Bolts Penetrate the Interior of the Duct
- Two Handles for Easy Removal and Installation
- Standard Sizes Range From 7″ x 7″ to 20″ x 20″
- Special Sizes Available Upon Request
GDD – Product Page
GDD – PDF Submittal
AT-5020 Product Page
AT-5020 Submittal
CD-5080-HP Duct Access Doors for High-Pressure Ducts
Duct access doors for high-pressure ducts are designed to provide convenient, economical access to high-pressure ducts. These doors are used in high-pressure ducts up to 8″ static pressure. Pressure rated to 8″ W.G. with leakage no greater than 2 CFM per sq. ft. or less. The 5/8″ notched knock-over tabs on the frame’s inside provide easy installation.
Doors can be made of aluminum or stainless steel when required. Other options include duct doors for fiberglass duct board, duct doors with vision panels, walk-in doors, and access doors for round ducts.
Product Features
- Great for High-Pressure Ducts up to 8″ Static Pressure
- Pressure Rated to 8″ W.G. with Leakage No Greater than 2 CFM per Sq. Ft. or Less
- 5/8″ Notched Knock-Over Tabs on the Inside of the Frame Provide for Easy Installation
- Options:
- Aluminum
- Stainless Steel
Specifications
- Door: 24-Gauge Galvanized Steel, Double Panel with High-Temperature Glue
- Frame: 24-Gauge Galvanized Steel with 5/8″ Notched Knock-Over Tabs
- Insulation: Door Panel Filled with 2″ Fiberglass Insulation (7.7 R Factor), Compressed into 1″
- Gasketing: 1/4″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing
- Between the Door and Frame. 1/8″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing Between the Frame and Duct
- Latch: Self-Tightening, Hand-Operated Cam Latch
- Standard Sizes Range from 6″ x 6″ to 24″ x 24″
- Call for Pricing/Special Sizes Available Upon Request
CD-5080-HP Product Page
CD-5080-HP PDF Submittal
HD-5070-F Duct Access Doors for Fiberglass Ducts
HD-5070-F duct access doors for fiberglass ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium-pressure fiberglass ducts. Duct access doors for fiberglass ducts are available in either hinged (HD-5070-F).
Product Features
- For Use in Low to Medium-Pressure Fiberglass Ducts
- Hinged Door Panel
- Options:
- Aluminum
- Stainless Steel
Specifications
- Door: 24-Gauge Galvanized Steel
- Frame: 24-Gauge Galvanized Steel
- Hinge: Continuous Aluminum Piano Hinge
- Insulation: Insulation 1″ Micro-AIRC M/F TYPE-475 R-Value 7.7
- Gasketing: 1/8″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing Between Door and Frame and Also Between the Frame and Duct
- Latch: Self-Tightening, Hand-Operated Cam Latch
- Standard Sizes Range from 6″ x 6″ to 24″ x 24″
- Call for Pricing/Special Sizes Available upon Request
HD-5070-F Product Page
HD-5070-F PDF Submittal
CD-5080-F "No Hinge" Duct Access Doors for Fiberglass Ducts
Duct access doors for fiberglass ducts offer convenient, economical access to fiberglass ducts. These doors are for use in low to medium-pressure fiberglass ducts. Duct access doors for fiberglass ducts are available in double cam (CD-5080-F) construction.
Product Features
- Best Low to Medium-Pressure Fiberglass Ducts
- Double Cam – No Hinge, Removable Door Panel
- Options:
- Aluminum
- Stainless Steel
Specifications
- Door: 24-Gauge Galvanized Steel
- Frame: 24-Gauge Galvanized Steel
- Insulation: 1″ Micro-Airc M/F Type 475
- Gasketing: 1/8″ Thick by 1/2″ Wide Closed Cell Neoprene Gasketing Between the Door and Frame. 1/16″ Thick by 11/2″ Adhesive Bonded Gasket Between the Frame to Duct
- Latch: Self-Tightening, Hand-Operated Cam Latch
- Standard Sizes Range from 6″ x 6″ to 24″ x 24″
- Call for Pricing/Special Sizes Available Upon Request
CD-5080-F Product Page
CD-5080-F PDF Submittal
WD-8000 Walk Through Access Door
The WD-8000 walk through access door provides convenient walk-through access to ductwork interiors and air handling units. Its heavy-duty construction, along with a continuous hinge and compression handles, provides for low leakage in low to medium-pressure systems and plenums.
Product Features
- Suitable for Heavy-Duty Construction, Along with Continuous Hinge and Compression Handles
- Optional Features: Removable Door Panel/Vision Panel/High-Pressure Units
Specifications
- Door/Door Frame: 22-Gauge Galvanized Steel, Double Panel Frame Is 1 15/16″ Wide x 1 1/2″ Deep Extruded Aluminum with Mitered Corners
- Hinge: Continuous Steel Piano Hinge – Opens 180 Degrees
- Insulation: Door Panel Filled with 1″ Thick Fiberglass Insulation – 4 R-Value
- Gasket: 1/8″ Thick x 1/2″ Wide Closed Cell Neoprene Gasketing Between Door and Frame
- Standard Latch: Dual-Acting Compression Handles – Operable from Both Sides
- Units 48″ High and Under to Have 2 Handles
- Units over 48″ High to Have 3 Handles
- Finish: Mill Finish
- Standard Sizes Range from 24″ x 36″ to 30″ x 72″
- Special Sizes Available Upon Request
WD-8000 Product Page
WD-8000 Submittal